|
| 24 Jan 2012 06:23 PM |
In a private server with the wiring tool...How do you check if an output is false? for example...if 1 light switch is on and the other one is off then do something else. |
|
|
| Report Abuse |
|
|
RA2lover
|
  |
| Joined: 09 Nov 2008 |
| Total Posts: 1254 |
|
|
| 24 Jan 2012 06:27 PM |
you'll need to build a XOR gate for that. Also, just look at the positions of the switches/lamps on gates |
|
|
| Report Abuse |
|
|
|
| 24 Jan 2012 06:27 PM |
| How do you build an XOR gate?..... |
|
|
| Report Abuse |
|
|
|
| 24 Jan 2012 06:42 PM |
| You don't know how to build an XOR gate but you tell me to assuming I know? :/ |
|
|
| Report Abuse |
|
|
dvdude
|
  |
| Joined: 28 Sep 2010 |
| Total Posts: 3263 |
|
| |
|
| |
|
|
| 24 Jan 2012 06:54 PM |
Anyone know?....
~|~ wafles26122 ~|~ |
|
|
| Report Abuse |
|
|
RA2lover
|
  |
| Joined: 09 Nov 2008 |
| Total Posts: 1254 |
|
|
| 25 Jan 2012 06:14 AM |
| just look for some images of how on google. if the diagrams are too complicated to you, just consider the little ball in front of a gate as a inverter added to it. |
|
|
| Report Abuse |
|
|
|
| 25 Jan 2012 06:21 AM |
It says an exclusive OR gate is built from 4 AND gates....but how to connect them?....
`~ wafles26122 ~` |
|
|
| Report Abuse |
|
|
RA2lover
|
  |
| Joined: 09 Nov 2008 |
| Total Posts: 1254 |
|
|
| 25 Jan 2012 06:27 AM |
There's no way to build a XOR gate with 4 AND gates. re-check the diagram and my previous post.
also, the diagrams usually have wires whose locations are rather obvious. |
|
|
| Report Abuse |
|
|