Craftero
|
  |
| Joined: 24 Jun 2011 |
| Total Posts: 1451 |
|
|
| 19 Mar 2016 12:20 PM |
Hey. I've spent the last 3 hours trying to create a diamond in Studio.
I've cut the diamond shape out of a Part (the Elevation view - i.e.Orthographic projection), and am trying to union this, a copy of the model rotated at 90 degrees and a basic Part. This should create a diamond-like shape, although I get an error every time I try to Union.
Does anybody have any advise? I've been working on this for more than 3 hours and, as you can probably tell, I've tried everything I can think of.
Any help or advise would be greatly appreciated. |
|
|
| Report Abuse |
|
|
Nomadn
|
  |
| Joined: 09 Nov 2010 |
| Total Posts: 2705 |
|
|
| 19 Mar 2016 12:21 PM |
What is the exact error, or does it just say error?
http://www.roblox.com/Ghetto-Dora-The-Explora-item?id=189745211 |
|
|
| Report Abuse |
|
|
Craftero
|
  |
| Joined: 24 Jun 2011 |
| Total Posts: 1451 |
|
|
| 19 Mar 2016 12:25 PM |
The error is:
"This union is not currently solvable. Try offsetting the parts from each other or try uniting each part individually." |
|
|
| Report Abuse |
|
|
|
| 19 Mar 2016 12:29 PM |
| Turn off collisions and try and make it then. |
|
|
| Report Abuse |
|
|
Nomadn
|
  |
| Joined: 09 Nov 2010 |
| Total Posts: 2705 |
|
|
| 19 Mar 2016 12:29 PM |
You could try unioning them a bit each time maybe.
http://www.roblox.com/Ghetto-Dora-The-Explora-item?id=189745211 |
|
|
| Report Abuse |
|
|
Logarian
|
  |
| Joined: 30 Oct 2013 |
| Total Posts: 22 |
|
|
| 19 Mar 2016 12:45 PM |
| Does it have to be a union, if you have all the parts just group them to make a modle |
|
|
| Report Abuse |
|
|
Craftero
|
  |
| Joined: 24 Jun 2011 |
| Total Posts: 1451 |
|
|
| 19 Mar 2016 12:49 PM |
Thanks for the advice so far.
Yes, it has to be a Union. I'm unioning UnionA and NegativePartB. |
|
|
| Report Abuse |
|
|
Ocks67
|
  |
| Joined: 07 Mar 2009 |
| Total Posts: 7218 |
|
|
| 19 Mar 2016 01:11 PM |
1- Make sure everything is anchored 2- Check the rotation values. Make sure they are nice, round, numbers (See number 3) 3- DO NOT drag parts with mouse. It can cause issues such as adding 0.001 rotation to your parts and cause much troubles. 4- Make parts a lot bigger than you need them to be (5x-10x bigger). You can resize the whole union once you're done. |
|
|
| Report Abuse |
|
|