Cillow
|
  |
| Joined: 25 May 2014 |
| Total Posts: 13282 |
|
|
| 06 Mar 2015 05:51 PM |
to get an accurate l2d for your foruming purposes, here is what you need to do but first we need to list the factors of risking an l2d thread
-the day -the time -how active the forum is and finally -the demand for that l2d (say 100000000; you will possible not get that number, like, a very minimum chance. There will be 400 or so other people that will post at the same time and when the time you post, you will be 100000554)
ok, lets just work with the original l2d (or last two digits (of a thread id (in case you didnt know)
1. Open the forum on one tab and open another tab set to LMaD. - LMaD is the fastest community in Roblox. This will be important in the other steps. 2. Write your thread. 3. Go to LMaD and constantly refresh. 4. Find the NEWEST THREAD made. If the l2d is above your desired l2d of that thread, go back to 3. If it is below, go to the next step 5. If your desired thread is, lets say, 50, and the newest LMaD thread is 40. GO TO YOUR NEW POST AND POST YOUR THREAD. If it is 30 or 20, wait 10-20 seconds. If it is 00 or less (>99 because were going back), wait for another thread.
Regarding to the issue of the activeness of the thread (usually 10pm est) the time of wait can vary from 10-20 seconds to immediately. Some time during the middle of the night, threads are so slow that it usually take 30 minutes from the thread number to go up by 100.
There you go. Reply for questions!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*HeyGuuuuuuuurls all over the place* |
|
|
| Report Abuse |
|
|
| |
|
friend9
|
  |
| Joined: 14 Nov 2008 |
| Total Posts: 147 |
|
| |
|
Cillow
|
  |
| Joined: 25 May 2014 |
| Total Posts: 13282 |
|
|
| 06 Mar 2015 06:30 PM |
to get an accurate l2d for your foruming purposes, here is what you need to do but first we need to list the factors of risking an l2d thread
-the day -the time -how active the forum is and finally -the demand for that l2d (say 100000000; you will possible not get that number, like, a very minimum chance. There will be 400 or so other people that will post at the same time and when the time you post, you will be 100000554)
ok, lets just work with the original l2d (or last two digits (of a thread id (in case you didnt know)
1. Open the forum on one tab and open another tab set to LMaD. - LMaD is the fastest community in Roblox. This will be important in the other steps. 2. Write your thread. 3. Go to LMaD and constantly refresh. 4. Find the NEWEST THREAD made. If the l2d is above your desired l2d of that thread, go back to 3. If it is below, go to the next step 5. If your desired thread is, lets say, 50, and the newest LMaD thread is 40. GO TO YOUR NEW POST AND POST YOUR THREAD. If it is 30 or 20, wait 10-20 seconds. If it is 00 or less (>99 because were going back), wait for another thread.
Regarding to the issue of the activeness of the thread (usually 10pm est) the time of wait can vary from 10-20 seconds to immediately. Some time during the middle of the night, threads are so slow that it usually take 30 minutes from the thread number to go up by 100.
There you go. Reply for questions!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*HeyGuuuuuuuurls all over the place* |
|
|
| Report Abuse |
|
|
|
| 06 Mar 2015 06:31 PM |
thanks i understand 10x better now
(0x10 is still 0) |
|
|
| Report Abuse |
|
|
| |
|
Cillow
|
  |
| Joined: 25 May 2014 |
| Total Posts: 13282 |
|
|
| 06 Mar 2015 06:45 PM |
no 10(x) is still 10x
youre wrong
if w is a variable
so thank you
also sometime w is substituded int w1
so
if w = 1
10(1)
=
10
thank you
*HeyGuuuuuuuurls all over the place* |
|
|
| Report Abuse |
|
|
|
| 06 Mar 2015 06:47 PM |
I'm an L2D god so I already knwe about this lel
Redesigning/Firecartoon: inb4mods ~ @RedesigningRBLX |
|
|
| Report Abuse |
|
|
|
| 06 Mar 2015 06:48 PM |
-not make a l2d thread and continue crapposting
The gene pool could use a little chlorine. |
|
|
| Report Abuse |
|
|
|
| 06 Mar 2015 06:49 PM |
RT in this day was really active. And I got this
http://www.roblox.com/Forum/ShowPost.aspx?PostID=156552403
Redesigning/Firecartoon: inb4mods ~ @RedesigningRBLX |
|
|
| Report Abuse |
|
|
|
| 06 Mar 2015 06:50 PM |
| i dont understand why anyone would do this. |
|
|
| Report Abuse |
|
|
cippey321
|
  |
| Joined: 02 Aug 2010 |
| Total Posts: 2351 |
|
| |
|
|
| 03 Jul 2016 12:33 AM |
come back to life forum
https://www.roblox.com/huehuehue-item?id=446615446 hey there |
|
|
| Report Abuse |
|
|