DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
|
| 08 Aug 2014 12:19 PM |
After the update, I can't make bricks flat anymore. Is there an option to do so, because I fell like ther should be, but I can't find it.
I also tried looking at this thread: http://www.roblox.com/Forum/ShowPost.aspx?PostID=142704378 |
|
|
| Report Abuse |
|
|
DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
|
| 08 Aug 2014 12:20 PM |
| I can;t find form factor...so I can't change it to "custom", according to that thread. |
|
|
| Report Abuse |
|
|
|
| 08 Aug 2014 12:21 PM |
| Same problem here. Roblox Studio is getting worse by the minute. |
|
|
| Report Abuse |
|
|
DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
|
| 08 Aug 2014 12:24 PM |
| @Voca: Know anyone who has this problem and has fixed it? xc |
|
|
| Report Abuse |
|
|
| |
|
|
| 08 Aug 2014 10:52 PM |
| FormFactor is the second option listed under "Part" in a part's properties. Double-check and make sure that you aren't using CornerWedgeParts as they do not have a FormFactor property. |
|
|
| Report Abuse |
|
|
DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
| |
|
|
| 09 Aug 2014 11:42 AM |
| Or you can use a plugin that automatically changes the form factor while resizing... Like CmdUtl or F3X Building Tools plugin. |
|
|
| Report Abuse |
|
|
|
| 09 Aug 2014 01:53 PM |
I Am Having the same Problem. I found FormFactor under Parts.Properties After changing it to custom I can make it flat again, but its very Hindersome to not be able to use the 1/5th and No Stud Tools that are so Plainly in the Studio. |
|
|
| Report Abuse |
|
|
DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
|
| 09 Aug 2014 09:14 PM |
| @Shining: It's that the cold truth? ;-; |
|
|
| Report Abuse |
|
|
DJXTR3M3
|
  |
| Joined: 23 Dec 2013 |
| Total Posts: 1453 |
|
| |
|
|
| 10 Aug 2014 05:40 PM |
| use the space wall block, it will go flat.. |
|
|
| Report Abuse |
|
|