|
| 22 Jul 2013 01:00 PM |
I'm having a very annoying problem. The bricks in my game are not lining up with the studs of other bricks, so it ends up covering up half of the studs of other bricks, and I don't know why. To be more clear, here is a screenshot(Wait for it to be approved by moderators): http://www.roblox.com/RobloxScreenShot07222013-135827738-item?id=123594053 |
|
|
| Report Abuse |
|
|
wah1
|
  |
| Joined: 09 Apr 2011 |
| Total Posts: 72 |
|
|
| 22 Jul 2013 01:06 PM |
Go to the properties in the unlined brick and check the postion. Then go to the brick thats next to it and is lined up correctly and check its position. The # thats the closest together is the number that you will ajust. Check the number in the good brick and then go to the bad one and change it.
this might be confusing. but its easy once you figure it out... |
|
|
| Report Abuse |
|
|
|
| 22 Jul 2013 01:16 PM |
If all your parts have the FormFactor property set to symmetric then all of them should line up. Also pay attention to the grid tool. If it is anything but 1grid you could run into problems.
Every part has a front, back, top, bottom, left and right sides. If you stretch the part in or out , then move it closer to the stud your trying to line up this might fix your problem. What I mean is the part with the half stud you could stretch it the other way until the end has a full stud against the other part. |
|
|
| Report Abuse |
|
|
| |
|
andrei012
|
  |
| Joined: 05 Nov 2010 |
| Total Posts: 279 |
|
|
| 23 Jul 2013 06:42 AM |
| Make everything Symmetric, Symmetric have exactly 1 size |
|
|
| Report Abuse |
|
|
|
| 23 Jul 2013 11:20 AM |
Sometimes if I make one part of the model symmetric, it goes somewhere else it is not supposed to go, and I cannot line it back up with the model. So I guess I have to make EVERYTHING symmetric? The model does have quite a lot of parts in it. |
|
|
| Report Abuse |
|
|
|
| 23 Jul 2013 11:36 AM |
| Just turn on nogrid button and stretch it to line up. I thought you where trying to line up studs not parts. |
|
|
| Report Abuse |
|
|
|
| 23 Jul 2013 11:42 AM |
I tried the symmetrical thing, and it did not work. I made the part and the part I wanted to connect to both symmetric, and the studs still did not line up |
|
|
| Report Abuse |
|
|
|
| 23 Jul 2013 11:47 AM |
| Simply turn on the one stud grid indicated by a magnet at the top with a number "1" next to it and drag the blocks around until it fits your need. |
|
|
| Report Abuse |
|
|
Catmitten
|
  |
| Joined: 20 Jul 2013 |
| Total Posts: 52 |
|
|
| 23 Jul 2013 11:52 AM |
| You could move in into place, I don't know? |
|
|
| Report Abuse |
|
|
|
| 23 Jul 2013 11:52 AM |
| Which game are you trying to fix? |
|
|
| Report Abuse |
|
|
andrei012
|
  |
| Joined: 05 Nov 2010 |
| Total Posts: 279 |
|
|
| 24 Jul 2013 01:57 AM |
| Select everything then make them all symmetric at once |
|
|
| Report Abuse |
|
|